This page contains affiliate links. As an Amazon Associate, Filtered Water Wise earns from qualifying purchases. Affiliate disclosure.
How this review was put together: from NSF International’s public certification listing, iSpring’s product pages and the RCC7-series installation manual (see “Sources”). We have not tested these systems ourselves. How we review. Last checked 28 October 2026.
iSpring sells the same under-sink reverse osmosis platform under several model codes, and on Amazon the listings blur together. They share the same filters and membrane. They differ in three ways: whether there’s an alkaline remineralization stage (“AK”), whether there’s an electric booster pump (“P”), and, the part most buyers miss, which exact versions NSF has certified, and for what. This page covers all of them so you can choose the right one.
Which RCC7 version do you need?
| Model | Alkaline stage | Booster pump | NSF/ANSI 58 status (NSF listing) | Best for |
|---|---|---|---|---|
| RCC7AK-BLK (black faucet) / RCC7AK-BN (brushed nickel) | Yes | No | Certified: TDS, lead, fluoride, barium, cadmium, copper, trivalent chromium, selenium, asbestos. Also NSF/ANSI 372 (lead-free materials) | Most homes with 45–70 psi water pressure |
| RCC7AK (original) | Yes | No | Certified: TDS reduction only | Same hardware; narrower certified claim |
| RCC7-BLK / RCC7-BN | No | No | Certified: same nine claims as RCC7AK-BLK | If you don’t want the remineralised taste |
| RCC7P-AK | Yes | Yes | Not listed | Low water pressure (under about 45 psi) |
| RCC7P | No | Yes | Not listed | Low pressure, no remineralization |
Rule of thumb: measure your water pressure first (a gauge on an outdoor tap is enough). At 45 psi or more, the RCC7AK-BLK gives you the broadest certified claims. Below about 45 psi, a non-pumped RO system fills slowly and wastes more water, and the pumped RCC7P-AK is the version iSpring designs for that situation. You give up the certification for the pump.
See the iSpring RCC7AK-BLK on Amazon (paid link) · See the pumped RCC7P-AK (paid link) · See the pumped RCC7P (paid link)
Certification, verified
NSF International’s public listing for iSpring Water Systems under NSF/ANSI 58 (checked 28 Oct 2026) shows two groups:
- RCC7-BLK, RCC7-BN, RCC7AK-BLK, RCC7AK-BN, RCC7AK-UVBLK, RCC7AK-UVBN and RCC7UV: certified daily production rate 25.41 gpd. Claims: asbestos, barium, cadmium, trivalent chromium, copper, fluoride, lead, selenium and TDS reduction. These are also certified to NSF/ANSI/CAN 372 (lead-free).
- RCC7, RCC7AK and RCC7AK-UV: certified daily production rate 21.04 gpd, TDS reduction only.
RCC7P and RCC7P-AK do not appear on NSF’s listing, and iSpring’s own RCC7-series manual says “Only RCC7, RCC7AK, and RCC7AK-UV are certified by NSF International” in its filter-pack table. (That manual predates the newer -BLK/-BN listings.) Treat their contaminant claims as manufacturer claims unless iSpring can point you to a current certification listing.
NSF listing: iSpring Water Systems, NSF/ANSI 58
Two things in iSpring’s marketing are worth reading carefully:
- PFAS: iSpring’s pages say the system reduces PFAS. PFAS is not among the NSF-certified claims for any RCC7 version. RO is one of the methods the EPA found can greatly reduce PFAS, but if a certified PFAS claim matters to you, look for NSF/ANSI 58 or 53 listings that specifically name PFOA/PFOS.
- “Removes over 1,000 contaminants” is a marketing line. The nine certified claims above are what an independent body has verified.
Specifications
| RCC7AK-BLK (non-pumped) | RCC7P-AK / RCC7P (pumped) | |
|---|---|---|
| Stages | 6: sediment (FP15), GAC (FG15), carbon block (FC15), RO membrane (MC7), post-carbon (FT15), alkaline (FA15) | Same filters plus a booster pump. RCC7P has no alkaline stage |
| Membrane rating | 75 GPD | 75 GPD |
| Certified production (NSF) | 25.41 gpd | Not certified |
| Storage tank | 3.2 gallons | 3.2 gallons |
| Incoming pressure | 45–70 psi (add a booster pump below 45, a regulator above 70) | Built for low-pressure homes: iSpring says the pump is for supplies below about 40–45 psi. Max 70 psi |
| Electricity | None | Needs an outlet under the sink (100–240 V adapter) |
| Max feed TDS | 750 ppm | 750 ppm |
| Max chlorine | 2.0 mg/L | — |
| Water temperature | 40–100°F, cold line only | 40–100°F |
| Size / weight (iSpring) | 15.5 × 5.1 × 19 in | 15.5 × 5.1 × 19 in; about 31 lb (RCC7P-AK) |
| Warranty | 1-year limited (filters and membrane excluded) | |
About “75 GPD”: that’s the membrane’s rating under ideal lab conditions. NSF’s certified production figure (21–25 gpd, depending on version) is measured under the standard’s test conditions and is a more realistic guide. It’s still far more than a typical family drinks. The original RCC7 manual gives an efficiency rating of 12.6% under NSF/ANSI 58 test conditions. In other words, in that test about one gallon in eight became drinking water and the rest went to the drain. Higher house pressure, or the booster pump, improves that.
Points in its favour
- The broadest certified claims in this class (on the BLK/BN versions): lead and fluoride are certified, not just TDS. That’s uncommon among RO systems sold mainly online.
- The whole system is certified, not just individual parts.
- A clear first-stage housing, so you can see when the sediment filter is clogging.
- Standard-size filters and multi-year filter packs, which make replacements easy to plan.
- A pumped option for low-pressure homes, so low-pressure homes can stay on the same filters.
Points against
- Confusing model codes. It’s easy to buy a version with narrower certification (plain RCC7AK) or none (RCC7P/RCC7P-AK) when you thought you were getting the certified one. Check the exact code.
- 750 ppm max TDS is lower than some rivals (APEC’s ROES series allows 2,000 ppm). Very mineral-heavy well water may need a different system or pretreatment.
- It needs 45 psi without the pump, and the pumped versions add noise, a power cord and an extra part that can fail.
- Waste water. A conventional tank RO system sends most of its feed water to the drain.
- A one-year base warranty, with paid extensions sold separately.
- The alkaline stage is about taste, not a meaningful mineral source. iSpring’s manual also asks for it to be changed more often (every 6 months).
Maintenance and filter costs
From iSpring’s RCC7-series manual:
| Part | Change interval |
|---|---|
| Stages 1–3 pre-filters (FP15, FG15, FC15) | Every 6–12 months, or sooner if flow slows (per the iSpring support FAQ); lean toward 6 months with sediment-heavy or heavily chlorinated water |
| Stage 4 RO membrane (MC7) | Every 2–3 years, or when TDS rejection falls below about 90% |
| Stage 5 post-carbon (FT15) | Every 12 months |
| Stage 6 alkaline (FA15) | Every 6 months |
| Housing O-rings | About every 3 years |
| Storage tank | Drain and refill fully at least once a month to keep water fresh |
Filter packs: iSpring sells 1-, 2- and 3-year packs. For the AK and P-AK versions these are F9K, F19K75 and F28K75. For the RCC7 and RCC7P, they’re F7-GAC, F15-75 and F22-75. The ongoing cost is mainly the pre-filters (every 6–12 months) and the alkaline cartridge, plus a membrane every few years. The multi-year packs usually work out cheaper per year than buying cartridges one at a time, but check current pricing, since it changes often. Keep a TDS meter handy: it’s the simplest way to tell when the membrane is actually worn out rather than changing it on a guess.
Alternatives
- Very hard or high-TDS water (above 750 ppm): the APEC ROES-PH75 accepts up to 2,000 ppm and is WQA certified to NSF/ANSI 58, though for TDS only.
- Prefer a retail brand: Whirlpool WHER25.
- No room for a tank: Frizzlife tankless RO or SimPure tankless RO.
- Can’t plumb anything in: Waterdrop CoreRO countertop or Bluevua RO100ROPOT-LITE.
- Want treated water at every tap, not just the kitchen: start with which type of filtration system suits a home.
Questions people ask
Is the RCC7AK the same as the RCC7AK-BLK?
Same platform, same filter part numbers. The BLK has a black faucet and a newer NSF listing that covers nine contaminant claims and lead-free materials. The original RCC7AK listing covers TDS only.
Do I need the pump version?
Only if your incoming pressure is below about 45 psi. iSpring’s manual says non-pumped systems need at least 45 psi. Below that the tank fills slowly and the system may drain continuously.
Does it remove fluoride?
Fluoride reduction is an NSF-certified claim for the RCC7AK-BLK/BN and RCC7-BLK/BN versions. It is not certified for the plain RCC7AK or the pumped models.
Will it work with softened water?
Yes. Putting RO after a softener is a common way to take the added sodium back out of drinking water. See how to remove sodium from softened water.